Tecfluid MX4 For FLOMID Series Manuel d'utilisateur télécharger pdf (Page 37)

7.4.5 Offset

In order to obtain a perfect linearization of the instrument, it is recommended to make an

adjustment of the zero offset each time an installation is performed.

The flow rate must be zero, that is, the liquid inside the pipe where the flowmeter is

installed should be completely stopped. Furthermore, a completely full pipe is necessary

in order to make an effective adjustment.

When the option Offset is selected, the following screen is shown:

When the flow rate is stable, press the key (Enter) and the instrument will save the value.

7.5 Outputs

This screen allows to program the four outputs of the instrument: Relay 1, Relay 2, pulses

and analog output (4-20 mA).

7.5.1 Relay 1 and relay 2

By selecting one of the two relay outputs, next screen appears with the options which

allow to assign the relay to a function.

CONVERTER PROGRAMMING

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 63 64

Rosman Mohamed 12 Jul 2024 | 01:50:59

thank you

Tecfluid MX4 For FLOMID Series Manuel d'utilisateur Page 37