Tecfluid CIP II Manuel d'utilisateur

Programmable Totalizing Counter CIP II Instructions Manual R-MI-CIP II Rev.: 0 English version instrumentation for fluids

1. INTRODUCTION The pulse counter CIP II is designed to work with Tecfluid’s volumetric counters (Covol) and turbines. The circuit is based on a micro

3 2.1.2 Pulses per Unit In this mode there are 7 digits (five whole numbers and two decimals). The value that must be introduced is the pulses per un

4 2.3 COUNTER OVERFLOW If one of the counters overflow, this condition is indicated at the right of the partial totalizer. If neither of the counters

5 5. MEASUREMENT ERROR CORRECTIONS The calibration of the mechanical flow meters is made with water at 20 oC to obtain a calibration for a liquid of

8. TECHNICAL CHARACTERISTICS 8.1. Power supply CR-2450 lithium battery Nominal voltage: 3V Capacity: 560 mAh Power consumption: 8 µA 8.2. Totalize

8.5.2 .Turbine The turbine input is designed for connecting to the coil of a magnetic pick-up. The input impedance is 1,2 K. This input is protect

10. Dimensions for CIP II L TECFLUID, S.A. Narcís Monturiol, 33 E-08960 Sant Just Desvern Tel. + 34 933 724 511 - Fax +